Power & Source of Big Ideas

NanoPi 4Mv2 boot problem with eMMC

Moderators: chensy, FATechsupport

Hi,

I get a new NanoPi 4Mv2. It was mounted on the heatsink and boot from eMMC.
Unfortunately he boots very reluctantly from the eMMC card. If the Pi is cold, there is no change that it boots. It simply hangs itself during the boot process. Since the Pi is a bit warmer the boot process works sometimes. Only after the computer has reached a temperature of approx. 35°C it runs reasonably stable from the eMMC. The problem does not exist when booting from an SD card.
Additionally the devices (keyboard, mouse, SSD) are sometimes not recognized with 2 USB3 ports.
I use an original power supply for the Raspberry 4.
Is there a hardware problem?
I received a m4v2 just this week... the Android 7.1 image on the emmc boots fine, regardless of the board temp.

I've had my own problems getting the board to boot with emmc in place and the eflasher image on sd.

others may be more able to help you with more detail as to your image, etc.

where did you get this board?
Do you have an error message while getting the board to boot with emmc ?

ShowBox Tutuapp Mobdro
I've been using a M4 v2 for a month or so now.
Boots off a 64G eMMC - but running FriendlyCore (Ubuntu 18.04).
It's in my basement and I've booted it many times - cold and warm - no issues with mine.
Only time I had a problem was when I left a micro-sd card stuck in the slot. When I took it out and restarted the system, it booted fine.
The problem has disappeared. No more problem with the emmc. I think, it was a problem with the software.
Thanks for your help.

Who is online

In total there are 2 users online :: 0 registered, 0 hidden and 2 guests (based on users active over the past 5 minutes)
Most users ever online was 5185 on Wed Jan 22, 2020 1:44 pm

Users browsing this forum: No registered users and 2 guests