Power & Source of Big Ideas

duo error reset board message

Moderators: chensy, FATechsupport

hi I have a few duos , two of them appear dead but when you monitor the debug serial port holding down the reset button at power up they display

U-Boot SPL 2017.05 (Jul 10 2017 - 11:16:21)
BOARD: Nanopi Duo id=4
### ERROR ### Please RESET the board ###

simply question, how do i do that? or are they scrap?
it seems that the onboard memory has died :(

Got such a problem with 1 of my 8
OrangePi One.

I also got there the ouput from the bootloader and then nothing :(
I have the same problem, I hope your help
Do you have access to a hot air re-work station?

It might be nothing more than a bad connection on one of the BGA balls.and a reflow of the memory chips might work. No guarantee but worth a try if you have access to one.

Who is online

In total there are 9 users online :: 0 registered, 0 hidden and 9 guests (based on users active over the past 5 minutes)
Most users ever online was 5185 on Wed Jan 22, 2020 1:44 pm

Users browsing this forum: No registered users and 9 guests