Power & Source of Big Ideas

We would suggest you try that on a Windows PC.
A much easier way to install an OS is to use an SD card without using the MiniTools
We didn't test that.
Sorry we only have this solution to flash the eMMC.
You may try a different card.
No not ready yet.
We are working on it and wish we could release it in several weeks.
FriendlyARM released a high quality MicorUSB cable for NanoPi Family boards.
Here is its product page:
http://www.friendlyarm.com/index.php?ro ... duct_id=99
We eventually improved our shipping system. Now the shipping cost with CHINA POST to most countries for one NanoPi family board is as low as $5.
We have released all our existing and will release all future 3D printing files for free download here:
Sorry we didn't test this feature. You may have to google it.
We didn't encounter this issue. Did you try just connecting your board to either an HDMI monitor or an LCD?
We didn't test this. Could you please show us how you did that?
Theoretically yes, but we didn't populate the pins nor did we do any software development for this
It is MP2
You can try this:
ifconfig eth0 down; ifconfig wlan0 down; ifconfig wlan0 up and connect the board to your WIFI
Currently the 4418 based board (including M2) only work with CAM500A under Android.

Here is a link to our latest 4418 based boards' image files:
https://www.mediafire.com/folder/ilkcy3 ... noPi2Board
Hi here is an example :
http://wiki.friendlyarm.com/wiki/index. ... 602_Keypad

You can check our matrix modules . These modules show how to connect them to 4418 based boards' GPIOs

http://wiki.friendlyarm.com/wiki/index. ... age#Matrix
The single board option means it goes with just a board without anything else (3D housing, LCD, power adapter, TF card, ... etc)
Unfortunately none of our existing boards can support that
Sorry we are late. Here is a link to the T3 image files:
https://www.mediafire.com/folder/gg764i ... C-T3_Board
Sorry the M1 is not ready to work with CAM500A yet. It now only works with CAM202A under Debian
I assume you meant to install an OS without a screen? If my understanding is correct for our boards which has Flash you can do it with an SD card.
Here is a reference:
http://wiki.friendlyarm.com/wiki/index. ... _from_eMMC
Two media just reported our latest product : NanoPi M3. Here are the links to the message: Here is the CNX's report http://www.cnx-software.com/2016/05/20/35-nanopi-m3-octa-core-64-bit-arm-development-board-is-powered-by-samsung-s5p6818-processor/ Here is the Hackerboards' report: http://hackerboard...
Here is an interesting post comparing the NanoPC-T2/T3 and other popular boards:
http://wiki.ant-computing.com/Choosing_ ... .2F05.2F21
Here is a download link for T3's image files:
https://www.mediafire.com/folder/gg764i ... C-T3_Board
Here is a download link for T3's image files:
https://www.mediafire.com/folder/gg764i ... C-T3_Board
Hi we tested ADB shell with both a MicroUSB cable and an Ethernet cable and both worked.
Could you give me more details about how you tested that? If it failed could you help post the messages you observed?
Unfortunately we haven't tested the driver under Debian for CAM500A. We already compiled the CAM500A driver into our latest Debian kernel but haven't had time to do enough tests.
Sorry we are still working on it.
After it is done we will release it on this page:
http://wiki.friendlyarm.com/wiki/index. ... tor_Driver
Sorry we don't have a simpler way to do that . You have to recompile the kernel if you want to change the resolution to one other than 720P
Yes T3's GPU is Mali 400
Sorry still need a couple of days to upload its image files
We are working on the 2G model and wish to release it in the near future
We released a new Pi member: NanoPC-T3.

Here is its product page:
http://www.friendlyarm.com/index.php?ro ... uct_id=123

Here is the CNX's report:
http://www.cnx-software.com/2016/04/29/ ... ls-for-60/
CNX just reported our latest product : NanoPC-T3. Here is the link to the message: http://www.cnx-software.com/2016/04/29/nanopc-t3-octa-core-cortex-a53-single-board-computer-sells-for-60/ Here is the product page: http://www.friendlyarm.com/index.php?route=product/product&path=69&product_id...
Sorry we need more messages. Could you help collect a more complete log?
Hi what terminal did you login to your Pi 2 from? We tried that from a host running Ubuntu 14.04 and it worked. Since this was a communication process between your terminal and the Pi 2 we suspect that this issue might be associated with your terminal.
Hi If you run Debian you can try "free -m" in a commandline terminal. If you run Android you can check it like what you will do when you check an Android phone
A stable 5V/2A power supply is a must.
Hi unfortunately we only have this kernel for Debian. A lot of work has to be done to migrate a new kernel to the platform. In the near future we may not have such a plan.
Sorry for the late response. We are still working on it. It may take another two days from today.
Hi, I have a question, how do you access the second SD card? When I insert it and run Debian from the first one, I cannot access it from the OS. I get an erros message saying "The specified directory '...' is not valid.". I hope you can help me. Abel. Hi Abel, I need to confirm with you a...
What TF card did you use and what power supply did you use?
Hi, I've just received my NanoPi M1 and M2. Wiki page teaches from where to download the tool chain files for NanoPi (Samsung processor). Is the same tool chain used for M1 and M2 (Allwinner H3 processor)? The same for Matrix examples. Are they compatible for M1 and M2? Thanks! The tool chains for ...