FriendlyARM

Can download from http://www.hjtag.com/download.html a new version have add supports LPC2300 and LPC2400. Fixed bug for bin to hex conversion.

From tested, it work very perfect with H-Link ARM JTAG.

From i introduce how to setting H-Link with H-JTAG Server Software in recent post. Today i will open case H-Link for show inside.

H-Link case : 25 pin D-SUB Cover easy for open.

H-Link have two buffer. for input, output signal between ARM board and Parallel Port. Can protect a high noise current and give a stable signal when use with long Parallel Port Cable ( I tested with 1.8 meter Parallel Port Cable, It work perfect )

Have a good news, in next version H-JTAG Software have plan to supports Cortex-M3

First goto http://www.hjtag.com/ for download a new version, new 0.6.2 available now!. After install, open a H-JTAG Server program and click on menu Settings -> JTAG Settings

Setting same a following picture.

In TCK Speed you can change to low speed.

After setting you must close a H-JTAG Server program, connect H-Link JTAG cable to your ARM board and plug-in H-Link with Parallel Port (can use Parallel Port cable). Open a H-JTAG Server software again, H-JTAG Server will recognize your ARM board.

Open Flasher software by click on Flasher menu. select type of ARM MCUs (your ARM board) in Flash Selection section. I test with LPC2378 ARM board

In Programming section, you can Erase, Check Blank or Program your hex file to ARM board.

More informations and how to integrate with IAR Embedded Workbench for debug ARM board can see in H-JTAG User Manual

Enjoy..