This section provides a guide for using our new Parallax Propeller P8X32 Education Board.
Following step by step
- Install FTDI USB Driver can download from http://www.parallax.com/Portals/0/Downloads/sw/uty/USBDriverInstallerV2.04.06.exe
- Install Propeller Tool Software v1.2 can download from http://www.parallax.com/Portals/0/Downloads/sw/propeller/Setup-Propeller-Tool-v1.2.exe
- Supply power 6v-9v DC to Parallax Propeller P8X32 Education Board, red LED light is ON
- Connect Parallax Propeller P8X32 Education Board to Computer USB port, Windows will recognize your Parallax Propeller P8X32 Education Board and blue LED light is ON.
- Open Propeller Tool Software and write sample code for blink P16 pin.
{{ Output.spin }}
PUB Toggle
dira[16]~~
repeat
!outa[16]
waitcnt(3_000_000 + cnt)
- Press F11 on your keyboard for compile and download code to Parallax Propeller P8X32 Education Board.
- Now P16 LED on Parallax Propeller P8X32 Education Board is blink.
You can download a schematic of Parallax Propeller P8X32 Education Board from http://www.micro4you.com/files/propeller/propeller.jpg
