Code: Select all

Armbian 20.02.4 Buster ttyGS0 

nanopi-r2s login: root
Password:
Last login: Thu Apr  9 06:09:43 UTC 2020 from 10.0.10.50 on pts/1
 _   _                         _   ____  ____  ____ 
| \ | | __ _ _ __   ___  _ __ (_) |  _ \|___ \/ ___|
|  \| |/ _` | '_ \ / _ \| '_ \| | | |_) | __) \___ \
| |\  | (_| | | | | (_) | |_) | | |  _ < / __/ ___) |
|_| \_|\__,_|_| |_|\___/| .__/|_| |_| \_\_____|____/
                        |_|                         
Welcome to Armbian buster with Linux 5.4.28-rockchip64

No end-user support: work in progress

System load:   2.41 0.64 0.22   Up time:       1 min
Memory usage:  27 % of 471MB    IP:            10.0.30.132 169.254.10.105 10.0.20.215
CPU temp:      70°C             
Usage of /:    4% of 58G   

[ General system configuration (beta): armbian-config ]


- login console is enabled also on mUSB connector
- known problem: reboot sometimes doesn’t bring the device back.
- network devices are not managed by Network manager. Configure via /etc/network/interfaces
- comes in Bionic, Buster, Bullseye and Stretch
- can be build from sources https://github.com/armbian/build
- supported: Docker, Wireguard, ...
- Iperf3 on lan: 937 - 910Mbits/s and wan: 879 - 831Mbits/s
- getting started

https://www.armbian.com/nanopi-r2s/