Power & Source of Big Ideas

NanoPC-T4 power rst button

Moderators: chensy, FATechsupport


Is there any way that I can power on/off /rst via the gpio pins?

I want to use an push button membrane to stick under touch screen
Never understood why so many boards are not fitted with an external POWER button connector. It makes them very difficult to power on unless you have access to the power button that is fitted to the board, and not something that is ideal at times. I want to use the T4 in a sealed enclosure so I need a way to power it on. Looks like the board mod is needed to do this upon power application.

Luckily for me, I use the Nano PC T3 Plus in one of my other designs and the power and reset are taken out to the GPIO headers. The T3 is a very nice little reliable board for me.

Who is online

In total there are 9 users online :: 0 registered, 0 hidden and 9 guests (based on users active over the past 5 minutes)
Most users ever online was 5185 on Wed Jan 22, 2020 1:44 pm

Users browsing this forum: No registered users and 9 guests