Power & Source of Big Ideas

PCI-e Header on the NEO4

Moderators: chensy, FATechsupport


Very nice board and price!

I want to make a board for the header, but I cannot find the PCI-e reset pin and PCI-e Clock request pins.
Do I need to route a GPIO for these pins in the DTS file of the kernel? In the datasheet of the chip I can find:


But those are not on the header with that name, and the pci-e reset pin is not used in the datasheet,.


Tech support:


Pci-e reset pin and pci-e Clock request pins. It is not necessary. Our internal test found that none of the PCIe adapter CARDS must have these two signals to work.
As for whether DTS can set a pin to achieve pci-e reset and pci-e Clock request, we did not conduct in-depth research.


在 2018年11月8日,18:24

Who is online

In total there are 7 users online :: 0 registered, 0 hidden and 7 guests (based on users active over the past 5 minutes)
Most users ever online was 5185 on Wed Jan 22, 2020 1:44 pm

Users browsing this forum: No registered users and 7 guests