Power & Source of Big Ideas

NanoPi Neo doesn't boot

Moderators: chensy, FATechsupport

I've just received a NanoPi Neo board. I downloaded the ubuntu w/ qte image (http://www.mediafire.com/file/ioa2b3c97 ... 17.img.zip) and burned a Kingstone 8GB class 10 micro sd card.
Then I powered the board with a 5V 2A power supply plugged into the microusb connector.

Leds on ethernet connector light up, the power led is barely on and nothing else happen. I tried to changed the sd-card with no luck.

Am I missing something?
Mark81 wrote:
I've just received a 'NanoPi Neo' board.
image s5p4418-ubuntu-core-qte-sd8g-20171017.img.zip and burned a Kingstone 8GB class 10 micro sd card.

Am I missing something?

Yes :) your are downloaded a image for another cpu "s5p4418"

For the NanoPi Neo (not 2 nor 2 plus nor NanoPi2 /NanoPi 2 Fire /NanoPi S2 /NanoPi M2A)
= http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO
use a image from the NanoPi Neo directory:
https://www.mediafire.com/folder/n5o8ih ... hdtp5nkect

4418 (Samsung S5P4418) is for the
NanoPi2 /NanoPi 2 Fire /NanoPi S2 /NanoPi M2A Hardware

Who is online

In total there are 11 users online :: 0 registered, 0 hidden and 11 guests (based on users active over the past 5 minutes)
Most users ever online was 2865 on Sun Nov 10, 2019 5:27 am

Users browsing this forum: No registered users and 11 guests