Power & Source of Big Ideas

Neo Air or M1 Plus supports gpio interrupt?

Moderators: chensy, FATechsupport

Hi, Does H3 (neo air or m1 plus) support gpio interrupt by default? Tried to set poll() on GPIOA6 (6) but it seems not working.
Yes GPIO A6 interrupts should work.

In french, you can google translate and follow these steps:
https://www.blaess.fr/christophe/2013/0 ... -sur-gpio/

At command "echo 23 > export", do the command "echo 6 > export" and it will do the rule.
auto3000 wrote:
Yes GPIO A6 interrupts should work.

In french, you can google translate and follow these steps:
https://www.blaess.fr/christophe/2013/0 ... -sur-gpio/

At command "echo 23 > export", do the command "echo 6 > export" and it will do the rule.


Thanks @auto3000, it seems there is a problem with python's poll. Rock on!

Who is online

In total there are 3 users online :: 0 registered, 0 hidden and 3 guests (based on users active over the past 5 minutes)
Most users ever online was 106 on Tue Jun 04, 2019 5:48 pm

Users browsing this forum: No registered users and 3 guests