Power & Source of Big Ideas

NanoPi Fire 3

Moderators: chensy, FATechsupport

I have a Nano Pi Fire 3. Just installed debian image

When I boot the debian image (as listed on the wiki) - it does not create the wlan0 device so wifi is not configured.

Most other systems are fine - eth0, lo etc. Desktop comes up file....

There seems to be firmware missing for the wifi chip ?

Anyone else come across this - or know how to get wlan0



root@NanoPi3:~# uname -a
Linux NanoPi3 3.4.39-s5p6818 #4 SMP PREEMPT Tue Sep 12 11:40:09 HKT 2017 armv7l GNU/Linux




Code: Select all

[b][    6.272000] failed to power up DHD generic adapter, 1 retry left[/b]
[    6.292000] wifi_platform_set_power = 0
[    6.292000] ======== PULL WL_REG_ON LOW! ========
[    6.292000] wifi_pm: bcmdhd: 0
[    6.404000] wifi_platform_bus_enumerate device present 0
[    6.404000] failed to power up DHD generic adapter, max retry reached**
[    6.404000] unregister wifi platform drivers
[    6.404000] wifi_platform_bus_enumerate device present 0
[b][    6.404000] dhd_module_init: Failed to load the driver, try cnt 1[/b]
[    6.404000] ======== bcm_wlan_set_plat_data ========
[    6.404000] host_oob_irq: 187
[    6.404000] host_oob_irq_flags = 414
[    6.404000] dhd_wifi_platform_load: Enter
[    6.404000] Power-up adapter 'DHD generic adapter'
[    6.404000] wifi_platform_set_power = 1
[    6.404000] ======== PULL WL_REG_ON HIGH! ========
[    6.404000] wifi_pm: bcmdhd: 1
[    6.556000] systemd-journald[207]: Received request to flush runtime journal from PID 1
[    6.724000] wifi_platform_bus_enumerate device present 1
[    7.924000] failed to power up DHD generic adapter, 1 retry left
[    7.944000] wifi_platform_set_power = 0
[    7.944000] ======== PULL WL_REG_ON LOW! ========
[    7.944000] wifi_pm: bcmdhd: 0
[    8.064000] wifi_platform_bus_enumerate device present 0
[    8.064000] failed to power up DHD generic adapter, max retry reached**
[    8.064000] unregister wifi platform drivers
[    8.064000] wifi_platform_bus_enumerate device present 0
[    8.064000] dhd_module_init: Failed to load the driver, try cnt 0
[    8.064000] dhd_module_init: Failed to load driver max retry reached**
[    8.064000] dhd_module_init: Exit err=-19
[    8.128000] Bluetooth: Core ver 2.21
[    8.140000] NET: Registered protocol family 31
[    8.148000] Bluetooth: HCI device and connection manager initialized
[    8.160000] Bluetooth: HCI socket layer initialized
[    8.168000] Bluetooth: L2CAP socket layer initialized
[    8.176000] Bluetooth: SCO socket layer initialized
[    8.192000] Bluetooth: HCI UART driver ver 2.3
[    8.200000] Bluetooth: HCI UART protocol H4 registered
[    8.208000] Bluetooth: HCI UART protocol BCM registered
[    8.220000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    8.228000] Bluetooth: BNEP filters: protocol multicast
[    8.236000] Bluetooth: BNEP socket layer initialized


A doh moment. The Fire 3 does not have on board wifi ! :o

A usb wifi dongle works fine....

Who is online

In total there is 1 user online :: 0 registered, 0 hidden and 1 guest (based on users active over the past 5 minutes)
Most users ever online was 102 on Mon Oct 08, 2018 12:42 pm

Users browsing this forum: No registered users and 1 guest