Page 1 of 1

NanoPC-T2 does not get IP after boot on ubuntu

Posted: Thu May 02, 2019 2:02 pm
by leemccarthyn
I have nanopc-T2, It does not get IP with Ethernet when I connect it to my host(PC with DHCP IP). I install ubuntu with qt core, this is wiki page said for Ip:"If a board is connected to a network via Ethernet before it is powered on it will automatically obtain an IP with DHCP activated after it is powered up." I do that but again write on LCD : IP:0.0.0.0
how can I solve it?