Power & Source of Big Ideas

Nothing ? There are no support on friendlyarm products ? :( you could try: aplay -D plughw:0,0 test.wav [test.wav is your test-sounfile] plughw:0,0 is card 0 device 0 = card 0: Pcm5102a [Pcm5102a], device 0: Playback pcm5102a-hifi-0 [] or create a /etc/asound.conf for ALSA pcm.!default { type hw ca...
....but no News-entry in the Forum :( Some descriptions are not-so-right.... Neo Core2 says the MiniShield would fit in a RPi3 Case....but the Audio-Port and the USB-Port are on a other place.... Neo Core2 text show also 512MB - but the featute-icons show only 1GB Ram. Neo Core2 Feature-Icons show O...
IF you go to the download section there is nanopi-neo-air_debian-nas-jessie_4.11.2_20171102.img.zip There is no "flasher" for this, so how does one put this image into eMMC ? Maybe you could boot from MicroSD, mounting a USB-Stick which has the nas.img on it and do a dd to the eMMC-device...
I’m a bit new to this and yes I know it says “1-bay” but I’m wanting to have at least two drives (SSDs really) in a NAS and was wondering if this is possible with this kit, or maybe multiple kits. The USB 3.0 SATA Controller is connected via USB internally. You could try to connect internally to a ...
aa305 wrote:
Is rootfs on usb at all possible (usb boot or rootfs on USB stick)? If so, can anyone share the method please.

take a look at the following thread
viewtopic.php?f=58&p=3199#p3199

Its for another model, but you could get the idea how it could work :)
After flashing the card (using USB Image Writer - on LinuxMint) I put the card in Any pointers on what might be wrong? I dont know the "USB Image Writer", but on Linux (32 or 64 bit) you coul also use Ether: https://etcher.io/ to write the .img to the uSD-Card. Normally the Neo2 should ge...
You could try to dd a image of the sdcard to the emmc: 1.) boot from sd-card 2.) insert a USB-Stick with a .img file of the sdcard in the USB-Port 3.) mkdir /mnt/sda1 4.) mnt /dev/sda1 /mnt/sda1 5.) dd if=/mnt/sda1/[name_of_the_image].img of=/dev/mmcblk0 bs=1M && sync 6.) to be sure: sync [+...
I have 2 Neo2 with self-soldered headers and they work fine with the NAS case as SAMBA server using armbian (debian stretch version). Got around 36MB/sec with 2 different 2.5" harddiscs (no SSD): https://dl.armbian.com/nanopineo2/Debian_stretch_next_nightly.7z Linux nanopineo2 4.13.13-sunxi64 #...
did you get the same errors when using

ifconfig eth0 down
ifconfig eth0 up
ifconfig wlan0 down
ifconfig wlan0 up
ifconfig -a
Anybody have any leads for installation of FreeBSD installer for any of these platforms? I have a NanoPi Neo2 and would love to get FreeBSD installed. In fact I know of a company that would purchase many of these if FreeBSD could be installed. It's an industrial OS that's preferred, and very very s...
mikemoy wrote:
And scroll down until you get to Boot System from SSD
.

Does the boot work without a TF/uSD-Card? and does it boot a TF/uSD-Card when inserted?
Sounds like a u-boot setting.....
if I use the command ifconfig, with the plugged wlan stick not as wlan0, but is displayed as wlxe84e06454862. It is a EDUP Stick with a RTL8192CU Chipset. wlxe84e06454862 wifi connected MyWLan The Config was done with sudo nmcli dev wifi connect "SSID" password "PASSWORD". But I...
Would you please check with the vendor to see when they plan to support Linux 4.x? Did you try the vendor-files from September? https://www.mediafire.com/folder/gg764iwvfm0mf/S5P6818 https://www.mediafire.com/folder/gg764iwvfm0mf/S5P6818#55r9ia83353xs or the file from today?: s5p6818-FriendlyCore-X...
Could anyone tell me at which USB-Controller this port is connected? As I could enable the Controllers 0,2 and 3 I think the port is at controller 1 see also https://forum.armbian.com/index.php?/topic/5256-edit-neo2-only-2-usb-ports-working-female-a-and-usb2-pin-header/ The port which is connected ...
Hi Igor, at the armbian NanoPi Duo page there is only a link button for the xenial ubuntu not for the stretch version. But I did get the stretch version out of the same directory while editing the url: https://dl.armbian.com/nanopiduo/Debian_stretch_next_nightly.7z PS: stretch-version installed: _ _...
at the wiki-page http://wiki.friendlyarm.com/wiki/index.php/1-bay_NAS_Dock_v1.2_for_NanoPi_NEO/NEO2 is only the old USB2.0 JM20329 to SATA version mentioned, but not the new actual (with aluminum case) with USB3.0 JMS567: http://www.friendlyarm.com/index.php?route=product/product&product_id=192 ...
Hi, I have a NanoPi Neo running on Ubuntu 15.10 (GNU/Linux 3.4.39-h3 armv7l). Onboard Audio (Line Out and MIC) is not working. What can I do? Did you check your pin-connections for Audio/Mic against "V1.1/V1.2 Audio" not NanoPi-NEO ( Pin 8-12 on Neo <v1.1), but NanoPi-NEO V1.1/V1.2 at the...
I've just received a 'NanoPi Neo' board. image s5p4418-ubuntu-core-qte-sd8g-20171017.img.zip and burned a Kingstone 8GB class 10 micro sd card. Am I missing something? Yes :) your are downloaded a image for another cpu "s5p4418" For the NanoPi Neo (not 2 nor 2 plus nor NanoPi2 /NanoPi 2 F...
here are also instructions how to use the complete mSATA as root / (not only partition2 if you clone from uSD to mSATA) while the uSD is /boot https://www.cnx-software.com/2017/10/30/nanopi-duo-quick-start-guide-ubuntu-breadboard-mini-shield-msata-ssd/#nanopi-duo-with-mini-shield-and-ssd search on t...
Iam using the NAS case without the FriendlyARM rom/image but armbian. I did get the JMicro HDD controller enabled, but - by now - not the right Frontside USB-Port :( Could anyone tell me at which USB-Controller this port is connected? As I could enable the Controllers 0,2 and 3 I think the port is a...
and not the Friedly-ARM-Image (ROM)... https://forum.armbian.com/index.php?/topic/5521-nanopi-neo2-and-neo-station-ns-120b-with-armbian/ and https://forum.armbian.com/index.php?/topic/5256-edit-neo2-only-2-usb-ports-working-female-a-and-usb2-pin-header/ with Kernel 4.13: Linux nanoneo2 4.13.9-sunxi6...
If I want to connect this board to a laptop / PC: via Ethernet (directly): 1) Do I need a crossover cable or a normal patch cable? 2) In the laptop / PC Network settings, do I need to leave the TCP/IPv4 setting to DHCP (IP address automatically) or do I need to adjust to manual? 3) If I need to inp...
HW decoder for Ubuntu Xenial Xerus 16.04 LXDE OS Image (A64) https://github.com/avafinger/cedrusH264_vdpau_A64 This is a deb package for the A64 OS image providing HW decoding on mplayer. Tested and running on the following devices (1080P hdmi): BananaPi M64 NanoPi A64 Pine64 OPI Win A64 Instructio...
After months of hard work, Armbian has come out with first stable test image (CLI or desktop) with a modern kernel 4.13.5. Welcome to check out what and how it works. Beware that (minor) troubles are still expected - but now we would like to hunt them. This means the nanopi-neo2_debian-core-jessie_...
Today I did get my NanoPi A64 - but both Ubuntu-Images at the FriendlyARM page are only Ubuntu 15.10 Wily Werewolf Images (Mate and QT-Core) where the sources for updateing via apt arent available anymore ( Error 404 ) :( So I did serach for another OS for the NanoPi A64.... armbian nor DietPi not a...
Hi, I am sorry we have no much time developpoing Ubuntu Mate. we recommend Ubuntu Core for the NanoPi A64 board. Or you can find other open source community about Allwinner A64 wouldnt it be better to remove the Mate-Image? - because the sources for Ubuntu Wily Werewolf (15.10) arent available anym...
Hi Guidol! Thank you so much for your answer. Now I have another question, How can I change the debug port to the usb otg port?. As you can see, I'm kind of new with linux. Hi, that wouldnt be easy :( On a Raspberry Pi you could use the otg-port as normal network port like eth0 (not serial). You co...
you dont need to resize the msata sdd if you format the ssd normally and then recursively copy the uSD to the ssd and then change the boot argument!?
when not using the network manager = using /etc/network/interfaces you can configure the ethernet address via this interfaces file like eth0 in the following sample: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp # clone mac address so we can get in net as instructed by IT hwaddress e...
normally fa is the password for root:

Ubuntu-Core User Accounts:

Non-root User:
User Name: pi
Password: pi

Root:
User Name: root
Password: fa
if you got the right distribution script.bin should be in /boot and not in /root
1 & 2 = YES 3 = NO :) when the board does start it will - like any Pi Board - send startup-messages (boot) to the serial port (ttyS0). After the boot-messages you will get a login-prompt. After login you could use the normal commands like on a SSH-session, but because you are DIRECTLY connected ...
If I take a look at the picture http://wiki.friendlyarm.com/wiki/index.php/File:Mini_Shield_for_NanoPi_Duo3.jpg I personally would think so....but I didnt really know it :( In the schematic at http://wiki.friendlyarm.com/wiki/images/9/9a/Schematic_NanoPi_Duo-V1.0_1706.pdf there are only 2 Pins for P...
search on the page
http://wiki.friendlyarm.com/wiki/index.php/NanoPi_Duo
for PWM and you will find the following:

Pin silk screen Name Linux gpio
DRX DEBUG_RX(UART_RXD0)/GPIOA5/PWM0 5
GPIOL3 doesnt seems to be readable via WiringNP :( root@NanoPiDuo:/home/guido# gpio readall +-----+-----+----------+------+---+-NanoPi-Duo--+------+----------+-----+-----+ | BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM | +-----+-----+----------+------+---+----++----+---+-----...
You could also use WiringNP for the GPIOs - according to the NanoPi Duo Wiki: http://wiki.friendlyarm.com/wiki/index.php/NanoPi_Duo#Access_GPIO_Pins.2FWirings_with_WiringNP Make a shell script: vi test.sh Type the following lines: LED=8 gpio mode $LED out while true; do gpio write $LED 1 sleep 0.5 g...
You could try to disable the Network Manager and configure manually like on the NanoPi Duo:
http://wiki.friendlyarm.com/wiki/index. ... _Static_IP
Looks like a bad or really slow MicroSD-Card. Which card you you use? Brand? Speed? Iam using a Sandisk Ultra 16GB , Speed: Class 10, 80MB/sec (grey/red - the white/red has only 48MB/sec) [EDIT]: Now I also see what you mean - I got this also showing up via dmesg: [290602.875821] sd 0:0:0:0: timing ...
I used the cpu_freq command and got the following: sudo cpu_freq INFO: HARDWARE=sun8i CPU0 online=1 temp=40822 governor=ondemand cur_freq=120000 CPU1 online=1 temp=41186 governor=ondemand cur_freq=240000 CPU2 online=1 temp=41186 governor=ondemand cur_freq=240000 CPU3 online=1 temp=41186 governor=on...
Hmm - after getting the script.bin from my Orange Pi PC and installing the needed things: apt-get -f -qq -y install sunxi-tools (this for bin2fex) apt-get install links hddtemp smartmontools I could start the rpimonitor-helper manually: /etc/init.d/rpimonitor-helper start but get some error (but it ...
I think the easiest way to check the actual cpu speed is using /usr/bin/armbianmonitor -m root@NanoPiDuo:~# /usr/bin/armbianmonitor -m Paketlisten werden gelesen... Fertig Abhaengigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig fping is already the newest version (3.13-1)...
Hi Frank, maybe you need a Virtual-Framebuffer (because without GFX-Card you didnt got a Framebuffer where the XServer can start with) - thats what I think personally. I googled a little around and did found this page: Headless VNC-Server using xvfb https://www.kaltpost.de/?page_id=84 You could chec...
Hi, the name of the blue LED "led_blue" could depend on the Operating System you do use. Today I installed my new NanoPi Duo and when I list the names of the LEDs I did get this: root@NanoPiDuo:/# ls /sys/class/leds nanopi:blue:status nanopi:green:pwr So with the ls-command you have to che...
Today I received my "Complete Starter Kit Neo2" with OLED-Hat. I got scared that the screen can burn in - so is there any chance to set a timeout for the display after pressing a key? I want to get the screen completly black after a special amount of time. And how can I change the content ...