Power & Source of Big Ideas

Good evening! I installed Android on the eMMC flash memory of my NanoPC-T3, everything works fine, minus the Netflix app. I can install the app, log in and even access the movie catalog, but when I click play in the movie, a 13001 error message appears and the app closes. I have already accessed th...
the same sitiations with WiFi connections and wired. In GKrellM I look processors load. And use USB HW power monitor. Surely it'll go down or frozen if you use a NOT GOOD USB power, we have provided the more powerful Power Adapter and USB cable for all microusb power supplying board, the fake cable...
I have experienced some, but not all, of the problems described in the first post. @Mindee: I urge Friendly Arm to do a better job developing the Ubuntu-MATE operating system for the A64. This is an excellent alternative to the Raspberry Pi 3, but Ubuntu-CORE will not work for many people. Supplyin...
We didn't ever use WM8731 with this I2S channel on H3 board. And has no suggestion on that.

Thank you

-- Mindee
The new Ubuntu Core ROM(2017-01-21) change log: 1. Upgrade the Ubuntu Core version from 15.10 to16.04 2. Separate the H3 BSP into 2 part : lichee and android,and Simplyfied lichee directory; 3. Update the cross compiler 4. Automatically extended file system on first booting, and repairing the file s...
Hi, All

Here I post what I do successfully.

I use this ROM


[img]
01-login.jpg
[/img]

[img]
02-SelectOS.jpg
[/img]

[img]
03-YesGo.jpg
[/img]
edit the image before copying to memory card in /etc/network/interfaces might use auto wlan0 or allow-hotplug wlan0 bash-# apt-get install multipath-tools bash-# kpartx -av nanopi-air-core.img add map loop0p1 (251:0): 0 81920 linear /dev/loop0 49152 add map loop0p2 (251:1): 0 7486114 linear /dev/lo...
Hi there, in the past days I contacted the support regarding the audio output. I just got this poor answer: "Hi, You can refer to this fourum:http://www.friendlyarm.com/Forum/viewtopic.php?f=47&t=264 " Right just i answered, that I already know this post (which was actually started by...
hi,All We just uploaded the file in mediafire, please go to download. NanoPi NEO Air ROM with the lastest eflasher Notice: Step 1: burn this rom into a blank tf card with win32image (in windows) or dd(in Linux) Step 2: boot your board with tf card Step 3: login with root:fa, and run eflasher Enjoy i...
sh3ppard wrote:
Hi,

Could you please check the CVBS? I am waiting for your advice to get it working.

Thanks,
Vašek.



We'll check it this week and reply here, please wait

Thank you

-- Mindee
Hi, Any news on the 2GB NanoPC T3? 1GB is good for tty only server, but Chromium can't run very well in 1GB with a Debian Jessie with MATE desktop. We are not ready for the 2GB version, We designed some NanoPi NEO boards in this time. But we are still working on it, some slow. Thank you -- Mindee
Now that I have mine working good with room on the 8GB eMMC can install things. I installed the apt install network-manager Took a wile to install all it needed. But it worked. After installing it had to start it. service NetworkManager start But go to activate and it's all blank on it's WiFi. Rebo...
Hi,

I am sorry we have no much time developpoing Ubuntu Mate. we recommend Ubuntu Core for the NanoPi A64 board. Or you can find other open source community about Allwinner A64

Thank you

-- Mindee
let's have a check, but how can we re-show it?

Thank you

--Mindee
We'll have a Android hardware programming kit soon, based on the NanoPi S2 & the new 4.3inch capacitive touch LCD, etc.

Thank you

Mindee
It need the latest rom, it's still been uploading..., please wait.

-- Mindee
Please use the lasted ROM version, it can auto resizing the rest space. Now only BaiduYun Download

-- Mindee
Hi, All

We have made a super easy flashing tools into eMMC already, the new "elfasher", the new ROM is uploading, will take about 1week. Please wait.

Or, you can download it from the China BaiDuYun, some slow.

Thank you

Mindee
Good evening! I installed Android on the eMMC flash memory of my NanoPC-T3, everything works fine, minus the Netflix app. I can install the app, log in and even access the movie catalog, but when I click play in the movie, a 13001 error message appears and the app closes. I have already accessed th...
nightsbird wrote:
That worked. What all operations do I have to run sync for?



It's better to "sync" after changing something in the SD card or eMMC, also on the PC linux.

Cheers

-- Mindee
Hi! I need latest BlueZ library 5.43, that's why I removed the pre-installed version 5.37 and installed 5.43 from sources. Unfortunately the Bluetooth adapter isn't found any longer. I did: 1. apt-get remove bluez 2. Compile and installed bluez 5.43 from sources 3. Reboot 4. Start Bluetooth service...
I installed the image but am unable to change the vnc password. I used the command vncpasswd entered the password and it works until I reboot. Then it resets back to the default fa123456 one. How can I fix this? Thanks in advance Can you try running "sync" after you changed it? Mindee
Yes I tried Ubuntu Core, but the kernel is very outdated. I would love to have more control over the process, and everything is open source, so it should be doable. Do you have any hints on which kernel options are necessary to get WiFi working? I started from the nanopi_neo config from buildroot w...
I try to run a buildroot based image with current mainline kernel since everything except the EMAC driver is merged to mainline. Since the Air doesn't have ethernet this should be fine. Unfortunatly I can not get Wifi working. It doesn't even show up in lshw etc. I compiled brcmfmac driver into the...
I try to run a buildroot based image with current mainline kernel since everything except the EMAC driver is merged to mainline. Since the Air doesn't have ethernet this should be fine. Unfortunatly I can not get Wifi working. It doesn't even show up in lshw etc. I compiled brcmfmac driver into the...
I am not so optimistic, unfortunatelly... After searching many forums, many SBC (single computer boards) I can see, that all you can be sure for working is putting light to connected LED :-( When you need more (camera, bluetooth, WiFi-Direct) - it could work, but you can not be sure it will work as...
Hello, I am watching this topic, because I am also working on camera project with Nanopi. That's a pity that you are reading specs of new board, it looks good, you buy that board and... that's the beginning of troubles. I feel the same (fighting with weak bluetooth implementation) . Anyway, reading...
ghl.bhrt wrote:
Hello All,

I had successfully run Xen on NanoPi M1 board.
Please find log on Xen mailing list,

https://lists.gt.net/xen/devel/432131

Regards,
Bharat


Congratlagoons! I think it's better if using NanoPi-M3 :)

Mindee
Hi,

We have no way for WiFi Direct using. We'll be appreciated if someone get it working.

Thank you

Mindee
nitipongs wrote:
Do you have a sample Python code for Matrix RTC module ?

Nitipong



Hi,

We have the C code sample, please check: Matrix-RTC.
We have no Python code yet.

Thank you

Mindee
nitipongs wrote:
Do you have a sample Python code for Matrix RTC module ?

Nitipong



Hi,

We have the C code sample, please check: Matrix-RTC.
We have no Python code yet.

Thank you

Mindee
Thank you for your answer, but probably I may be incorrectly expressed it. I have seen instructions from Wiki and I have seen it works. I have seen it it dozen times performed by other and it works. But my unit will send hundreds of files, many hours, many days and the requirement is it to be sent ...
Hi, All I didn't use CVBS output, usually I use HDMI cable, but I want to know why you choose CVBS ? Thank you Mindee Hello Mindee, I am working on application where the video signal from NanoPi-M1 will be transferred wirelessly. And we want our users to have the possibility to use both digital and...
Hi, well as I said in my first post the camera works even with the default driver. But the default driver can only control the most basic aspects of the camera and what is worse the framerate of the video is very small (about 8 FPS with 720p resolution). And on your e-shop under camera features is ...
Congratulations! We have a plan to setup the WiFi via Bluetooth, it need time.

Enjoy your air board.

Mindee
Hi,

We'll have a check after the Chinese Lunar holiday, please wait.

Thank you

Mindee
Well, thank you, the theory is known but I was asking about something more. For example, the obexftp is now in version 0.24.2 dated on nearly year before, previous version 0.24 is from year...2013 :-/ My question is for people who know this theme from practice, not from theory. Did someone make any...
Hello, I am going to buy this unit, becuase I am lookig for a cheap board with Bluetooth and camera input included. NanoPi Neo Air seems to be the best choice (and the only - talking about cheap board). Anyway, did someone play with its Bluetooth interface programming? I mean sending (mainly, but a...
Hi, All

I didn't use CVBS output, usually I use HDMI cable, but I want to know why you choose CVBS ?

Thank you

Mindee
Hi, I am sorry, my first post might have been a little bit confused. That's because I am quite new to this. So please excuse me if I write something that seems dummy. Like the modprobe command, which I realized was not needed. However, if I run the official Debian image and physically connect the C...
Does a guideline exist for noobs to the NanoPi Fire? I currently do not own a NanoPi but am keen to find out more before I purchase one. If you are a NanoPi owner, please share your views and experiences in this thread. Please see wiki.friendlyarm.com , and find the "NanoPi Fire" Thank yo...
P.S. In my thoughts, different CPU and Linux version with various application has the different effect on the 1-wire driver. It's difficult to archive a satisfied balance. Perhaps we can get a right result on a special board, but we are not sure if it would work well on other boards, So we made an ...
I was just walking through some threads in this forum. I experienced at least two threads with unsolved issues and no help from Friendly Arm: * DS18B20 not working on NanoPi NEO Air [1] * PWM on NanoPi NEO Air [2] So i wonder if Friendly Arm could support the great people who provide Armbian or Die...
Hello, I have tried running debian and armbian. I can log in via ssh but I have tried two different monitors with no success. I have tried setting different resolutions on armbian with h3disp. on Debian xrandr I get "Can't open display" Monitor recognises the cable being plugged in but ju...
Is it possible to slow the CPU down with cpu_frequency on this board? We have a long time Chinese holiday for now, we'll check this issue when be back. P.S. In my thoughts, different CPU and Linux version with various application has the different effect on the 1-wire driver. It's difficult to arch...
@Mindee Thanks for answering. It looks that this new NanoPi A64 board could be really go well with a LCD for stand-alone operation. Otherwise it will stay behind its competition from other boards in the market. We have a new capacitive touch LCD module "S430", it is very cheap, only $15. ...
Hi, davef

we use the standard apt tools in our all the Ubuntu Core, please try apt-get update & apt-get upgarde

thank you

Mindee
Can you login your air board and check the service status ?

root@FriendlyARM:~# service --status-all | grep rpi

the output would be like this:

[ + ] rpimonitor
[ - ] rpimonitor-helper

Mindee
Hi,Kamis

What's $5 LCD? We have a Tiny BakeBit OLED module. And a 2.8" TFT LCD with touch, please check our store.

Thank you

Mindee