Power & Source of Big Ideas

I installed the "nanopi-air-eflasher-sd8g-20161213.img" on a 32GB SD card. I thought I could then flash to the eMMC like this: Ubuntu 15.10 FriendlyARM ttyS0 FriendlyARM login: root Password: root@FriendlyARM:~# eflasher -bash: eflasher: command not found root@FriendlyARM:~# find / -name e...
This time is was easy to get the camera working it it. https://goo.gl/photos/QjxAZXsorwgSB2bd7 That's a screen shot of the webpage to the camera on it and got a photo of it's self with it. This has to be running to use it. root@FriendlyARM:~/mjpg-streamer# ./start.sh MJPG Streamer Version: svn rev: ...
Not sure what did it. But I rebooted and it got a WiFi IP then. Did dhclient wlan0 a lot of times waiting like 5 minutes for it and check it's ip with ifconfig. But it never got a IP. Till I rebooted it. Here is my command line with my WiFi Password Xed out. apt-get update nmtui df -h eflasher dhcli...
On http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO_Air they say this: Flash image to eMMC and they say do this command: eflasher I had to reload mine because I first put it on a 200GB SD card. But I guess it can't see it all. So I used that card on a raspberry pi. Used a 128GB on it now. Havin...
I forgot it had 8GB eMMC so I put a SD card on it with a image I downloaded. But I guess it don't boot from that but from the 8GB eMMC right?

Is there a way to get it to boot from the SD card?

-Raymond Day
I rebooted and it worked. Neat to see the camera on it.

Install phpsysinfo and it's neat to see the info of it. I copied the page.

NanoPiAir_phpsysinfo.png
NanoPiAir_phpsysinfo.png (119.99 KiB) Viewed 1037 times


I guess the only way to get it on WiFi is with a RS232 or maybe mount the image and edit the WiFi log in.

-Raymond Day
It says to do this: root@FriendlyARM:~/mjpg-streamer# make make: svnversion: Command not found gcc -D'SVN_REV=""' -O2 -DLINUX -D_GNU_SOURCE -Wall -c -o mjpg_streamer.o mjpg_streamer.c Cannot create temporary file in ./: Read-only file system <builtin>: recipe for target 'mjpg_streamer.o' f...
Got it all set up working good. Changed it's name to NanoPi-NEO because it had the same name as the other one I have friendlyarm.

It is a very nice little server box.

-Raymond Day
Order it on 8/15/2016 and got it today 9/2/2016. This time order it with a 3 amp 5 volt power supply and the case and heat sink. The case comes with the 4 screws. But one of mine the Philips head is messed up and I can't get a hold of it to screw it in. So only used 4 of the screws. Any one know wer...
Got the heat sink about a week ago and installed it and the screws that come with it can't use on the case! So I had to find my own and they are hard to find. They just fit in the holes like have to screw them in to it. To long too so I cut the rest off. I have to file them down yet. This is how it ...
/etc/hosts is blank.

The host name is at /etc/hostname

Can easy edit it doing nano /etc/hostname

-Raymond Day
Just took a chance and hope I would not mess up my NanoPi NEO. Used jumper wires and plug them in and got it the 1st time. Put a small SD card on the USB and it started to flash it's little LED so I was sure it worked. Did a Fdisk -l before and after and it sees it. Device Boot Start End Sectors Siz...
Not sure but maybe you need a better power supply.

Got mine now with a USB to RS232 on it and it booted up with the USB power on the RS232. I got plug in to a USB powered hub.

Here is a nice $10 2.5 amp at 5 volt power supply on Amazon.

-Raymond Day
I see Nano-Pi-NEO has 2 other USB ports the side one like real port.

2 USB-DP1 USB1 DP Signal
3 USB-DM1 USB1 DM Signal
4 USB-DP2 USB2 DP Signal
5 USB-DM2 USB2 DM Signal

If I hook them up to 2 USB plugs with the +5 and GRN will it work?

Or do I need some diodes on it or something?

-Raymond Day
I see Nano-Pi-NEO has 2 other USB ports the side one like real port.

2 USB-DP1 USB1 DP Signal
3 USB-DM1 USB1 DM Signal
4 USB-DP2 USB2 DP Signal
5 USB-DM2 USB2 DM Signal

If I hook them up to 2 USB plugs with the +5 and GRN will it work?

Or do I need some diodes on it or something?

-Raymond Day
To install Webmin have to download it then do: tar xzvf webmin-1.801.tar.gz cd webmin-1.801/ ./setup.sh It works like that. Got a lot of "Unable to locate package" But can just find them and wget and install them like phpsysinfo It's nice for how small it is. Runs good and putty fast. -Ray...
Posted this on Google plus were I 1st found out about this 4 weeks ago. Just got this Nanopi today and it is good. I could not get it to get a IP and had to hook up a RS232 to it and do a dhclient eth0 then show the IP it got ifconfig and could SSH to it. Installed LAMP server and samba, phpsysinfo...